Hp Dl360 G7 Ram Slots

Posted By admin On 15.06.20
PrintRate this content

DDR3 memory population guidelines

NOTE: Memory configurations listed do not apply to Factory Integrated Models.

Click here to use Online DDR3 Memory Configuration Tool for detailed memory configuration rules and guidelines.

Some DIMM installation guidelines are summarized below:

  • For servers with eighteen (18) memory slots:

    • There are three (3) channels per processor; six (6) channels per server

    • There are three (3) DIMM slots for each memory channel; eighteen (18) total slots

    • Memory channel 1 consists of the three (3) DIMMs that are closest to the processor

    • Memory channel 3 consists of the three (3) DIMMs that are furthest from the processor

  • DIMM slots that are white should be populated first
  • Do not mix Unbuffered memory (UDIMMs) with Registered memory (RDIMMs)
  • Do not install DIMMs if the corresponding processor is not installed
  • If only one processor is installed in a 2CPU system, only half of the DIMM slots are available
  • To maximize performance, balance the total memory capacity between all installed processors
  • It is not required, but it is recommended to load the channels similarly if possible
  • If any Quad rank DIMMs are installed, all channels are limited to only 2 DIMMs per channel.
  • You can only install two quad-rank DIMMs per channel
  • You can only install two UDIMMs per channel; if available, the third slot in the channel must remain empty
  • Populate DIMMs from heaviest load (quad-rank) to lightest load (single-rank) within a channel
  • Heaviest load (DIMM with most ranks) within a channel goes furthest from the chipset
  • For memory mirroring mode, channel 3 must be unpopulated. Channels 1 and 2 are populated identically
  • For lock-step mode, channel 3 must be unpopulated. DIMMs in channels 1 and 2 will be installed in pairs. The paired slotswill be 1,4; 2,5; 3;6 on a 3DPC system or 1,4; 2,5; on a 2DPC system
  • If mixing DIMM voltage is a requirement, please note that the DIMMs will run at 1.5V since all 1.35V are capable ofsupporting 1.5V operations
DIMM Type
Unbuffered with ECC DIMMs(UDIMMs)
SingleRank (1R)
Quad Rank (4R)
Dual Rank (2R)
4GB
4GB
8GB
16GB
2GB
DIMM Native Speed(MHz)
1333
1067
1067
1333
1333
LV/Reg
Reg
LV/Reg
Reg
Reg
Slots that can be populated
18
18
18
12
12
Maximum capacity (GB)
36
144
48
12
48
1 DIMM Per Channel
1333
1067
1067
1333
1333
13331
13331
13331
800
1333
3 DIMM Per Channel
800
800
n/a
n/a
n/a
NOTE:
  1. supported with ROM update via ROM Based Setup Utility (RBSU). UDIMM support is only on 12-slot servers
NOTE:
  • Mixing DIMM speeds is allowed, but the system processor speed rules always override the DIMM capabilities
  • If you do mix DIMM speeds, the memory bus will default to the minimum clock rate of all DIMMs in the system - even if theslower DIMM is on the other processor
  • If you install 1x 1066 MHz DIMM in channel 1 and 1x 1333 MHz DIMM in channel 2, you still run at 1066MHz
  • If you install 1x 1066 MHz DIMM in channel 1 and 5x 1333 MHz DIMMs with 1 DIMM Per Channel (DPC) in each of the otherchannels, you run at 1066 MHz
  • If you install 3DPC in one channel (if applicable) and 1DPC in all other channels, you run at 800 MHz
  • 95 Watt CPU's are required for 1333MHz DIMM speeds. All other CPU's are capable of up to 1067 MHz
  • References to the above MHz speeds are for the various speeds of DDR3 DIMMs; 1333 refers to DDR3-1333, etc.

Basic memory slot and population diagram

NOTE: Population order; start with 'A' first, 'B' second, 'C' third, etc.
CPU2
slot #
slot #
Chnl 1
1
1
2
2
3
3
4
4
Chnl 2
E
E
B
B
7
7
Chnl 3
F
F
C
C

Standard memory configuration (1 CPU model)

NOTE: 6GB, consisting of three (3) 2GB dual-rank PC3-10600 RDIMMs
CPU1
population order
population order
Chnl 1
G; empty
G; empty
D; empty
D; empty
A; 2GB DIMM
A; empty
Chnl 2
H; empty
H; empty
5
5
6
6
Chnl 3
I; empty
I; empty
8
8
9
9

Standard memory plus optional memory (1 CPU model)

NOTE:
  • 54GB, consisting of three (3) 2GB RDIMMs plus six (6) 8GB RDIMMs
    • 3x 2GB dual-rank PC3-10600 RDIMMs
    • 6x 8GB dual-rank PC3-8500 RDIMMs
CPU1
population order
population order
1
1
Chnl 1
D; 8GB DIMM
D; empty
A; 2GB DIMM
A; empty
4
4
Chnl 2
E; 8GB DIMM
E; empty
B; 2GB DIMM
B; empty
7
7
Chnl 3
F; 8GB DIMM
F; empty
C; 2GB DIMM
C; empty

Standard memory replaced with optional memory (1 CPU model)

RDIMM maximum configuration (1 CPU model)

NOTE: 96GB, consisting of six (6) 16GB quad-rank PC3-8500 RDIMMs
CPU1
population order
population order
1
1
Chnl 1
D; 16GB DIMM
D; empty
A; 16GB DIMM
A; empty
4
4
Chnl 2
E; 16GB DIMM
E; empty
B; 16GB DIMM
B; empty
7
7
Chnl 3
F; 16GB DIMM
F; empty
C; 16GB DIMM
C; empty

UDIMM maximum configuration (1 CPU model)

NOTE: 12GB, consisting of six (6) 2GB dual-rank PC3-10600 UDIMMs
CPU1
population order
population order
1
1
Chnl 1
D; 2GB DIMM
D; empty
A; 2GB DIMM
A; empty
4
4
Chnl 2
E; 2GB DIMM
E; empty
B; 2GB DIMM
B; empty
7
7
Chnl 3
F; 2GB DIMM
F; empty
C; 2GB DIMM
C; empty

Standard memory replaced with optional memory (2 CPU model)

RDIMM maximum configuration (2 CPU model)

NOTE: 192GB, consisting of twelve (12) 16GB quad-rank PC3-8500 RDIMMs
CPU1
population order
population order
1
1
Chnl 1
D; 16GB DIMM
D; 16GB DIMM
A; 16GB DIMM
A; 16GB DIMM
4
4
Chnl 2
E; 16GB DIMM
E; 16GB DIMM
B; 16GB DIMM
B; 16GB DIMM
7
7
Chnl 3
F; 16GB DIMM
F; 16GB DIMM
C; 16GB DIMM
C; 16GB DIMM

UDIMM maximum configuration

NOTE: 48GB, consisting of twelve (12) 4GB dual-rank PC3-10600 UDIMMs
CPU1
population order
population order
1
1
Chnl 1
D; 4GB DIMM
D; 4GB DIMM
A; 4GB DIMM
A; 4GB DIMM
4
4
Chnl 2
E; 4GB DIMM
E; 4GB DIMM
B; 4GB DIMM
B; 4GB DIMM
7
7
Chnl 3
F; 4GB DIMM
F; 4GB DIMM
C; 4GB DIMM
C; 4GB DIMM
NOTE: Capacity references are rounded to the common Gigabyte values.
  • 1GB = 1024MB
  • 2GB = 2048MB
  • 4GB = 4096MB
  • 8GB = 8192MB
  • 16GB = 16384MB

Legal Disclaimer: Products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may have older product names and model numbers that differ from current models.

Provide feedback

Please rate the information on this page to help us improve our content. Thank you!
  1. Was the information on this page helpful?
Hp Dl360 G7 Ram Slots

HP ProLiant DL380 G7 Memory Upgrade Options: The HP ProLiant DL380 G7 can be configured with up to 384GB of memory in a dual processor and 142GB in a single processor. Each processor has nine slots for registered dual in-line memory modules, 18 total. HP ProLiant DL360 G7 1U RackMount 64-bit Server with 2xSix-Core X5650 Xeon 2.66GHz CPUs + 32GB PC3-10600R RAM + 8x146GB 10K SAS SFF HDD, P410i RAID, 4xGigaBit NIC, 2xPower Supplies, NO OS (Renewed) 4.7 out of 5 stars 5. $189.99 $ 189. FREE Shipping.

Find many great new & used options and get the best deals for HP ProLiant DL360 G7 (579239-001) Server at the best online prices at eBay! Free shipping for many products! Crucial Memory and SSD upgrades - 100% Compatibility Guaranteed for HP - Compaq ProLiant DL360 G7 - FREE UK Delivery. Hp dl360 g7 ram slots not covered by the bonus, and then there are those that are covered but contribute less towards fulfilment of hp dl360 g7 ram slots wagering requirements. Games like slots, Keno, and scratch cards usually contribute 100% towards wagering requirements, while games like blackjack and video poker contribute far lesser.

Please wait while we process your request.
PrintRate this content

Hp Proliant Dl360 G7 Ram Slots

DDR3 memory population guidelines

NOTE: Memory configurations listed do not apply to Factory Integrated Models.

Click here to use Online DDR3 Memory Configuration Tool for detailed memory configuration rules and guidelines.

Some DIMM installation guidelines are summarized below:

The class in Qt responsible for custom types is QMetaType. To make the type known to this class, we invoke the QDECLAREMETATYPE macro on the class in the header file where it is defined: This now makes it possible for Message values to. Type 'MyType' has id: 1024; register status: true QObject::connect: Cannot queue arguments of type 'MyType' (Make sure 'MyType' is registered using qRegisterMetaType.) Bug is reproducable only if a queued connection is used (when objects are in different threads or explicit Qt::QueuedConnection is used) and MyType is declared inside a namespace. Send

  • For servers with eighteen (18) memory slots:

    • There are three (3) channels per processor; six (6) channels per server

    • There are three (3) DIMM slots for each memory channel; eighteen (18) total slots

    • Memory channel 1 consists of the three (3) DIMMs that are closest to the processor

    • Memory channel 3 consists of the three (3) DIMMs that are furthest from the processor

  • DIMM slots that are white should be populated first
  • Do not mix Unbuffered memory (UDIMMs) with Registered memory (RDIMMs)
  • Do not install DIMMs if the corresponding processor is not installed
  • If only one processor is installed in a 2CPU system, only half of the DIMM slots are available
  • To maximize performance, balance the total memory capacity between all installed processors
  • It is not required, but it is recommended to load the channels similarly if possible
  • If any Quad rank DIMMs are installed, all channels are limited to only 2 DIMMs per channel.
  • You can only install two quad-rank DIMMs per channel
  • You can only install two UDIMMs per channel; if available, the third slot in the channel must remain empty
  • Populate DIMMs from heaviest load (quad-rank) to lightest load (single-rank) within a channel
  • Heaviest load (DIMM with most ranks) within a channel goes furthest from the chipset
  • For memory mirroring mode, channel 3 must be unpopulated. Channels 1 and 2 are populated identically
  • For lock-step mode, channel 3 must be unpopulated. DIMMs in channels 1 and 2 will be installed in pairs. The paired slotswill be 1,4; 2,5; 3;6 on a 3DPC system or 1,4; 2,5; on a 2DPC system
  • If mixing DIMM voltage is a requirement, please note that the DIMMs will run at 1.5V since all 1.35V are capable ofsupporting 1.5V operations
DIMM Type
Unbuffered with ECC DIMMs(UDIMMs)
SingleRank (1R)
Quad Rank (4R)
Dual Rank (2R)
4GB
4GB
8GB
16GB
2GB
DIMM Native Speed(MHz)
1333
1067
1067
1333
1333
LV/Reg
Reg
LV/Reg
Reg
Reg
Slots that can be populated
18
18
18
12
12
Maximum capacity (GB)
36
144
48
12
48
1 DIMM Per Channel
1333
1067
1067
1333
1333
13331
13331
13331
800
1333
3 DIMM Per Channel
800
800
n/a
n/a
n/a
NOTE:
  1. supported with ROM update via ROM Based Setup Utility (RBSU). UDIMM support is only on 12-slot servers
NOTE:
  • Mixing DIMM speeds is allowed, but the system processor speed rules always override the DIMM capabilities
  • If you do mix DIMM speeds, the memory bus will default to the minimum clock rate of all DIMMs in the system - even if theslower DIMM is on the other processor
  • If you install 1x 1066 MHz DIMM in channel 1 and 1x 1333 MHz DIMM in channel 2, you still run at 1066MHz
  • If you install 1x 1066 MHz DIMM in channel 1 and 5x 1333 MHz DIMMs with 1 DIMM Per Channel (DPC) in each of the otherchannels, you run at 1066 MHz
  • If you install 3DPC in one channel (if applicable) and 1DPC in all other channels, you run at 800 MHz
  • 95 Watt CPU's are required for 1333MHz DIMM speeds. All other CPU's are capable of up to 1067 MHz
  • References to the above MHz speeds are for the various speeds of DDR3 DIMMs; 1333 refers to DDR3-1333, etc.

Basic memory slot and population diagram

NOTE: Population order; start with 'A' first, 'B' second, 'C' third, etc.
CPU2
slot #
slot #
Chnl 1
1
1
2
2
3
3
4
4
Chnl 2
E
E
B
B
7
7
Chnl 3
F
F
C
C

Standard memory configuration (1 CPU model)

NOTE: 6GB, consisting of three (3) 2GB dual-rank PC3-10600 RDIMMs
CPU1
population order
population order
Chnl 1
G; empty
G; empty
D; empty
D; empty
A; 2GB DIMM
A; empty
Chnl 2
H; empty
H; empty
5
5
6
6
Chnl 3
I; empty
I; empty
8
8
9
9

Standard memory plus optional memory (1 CPU model)

NOTE:
  • 54GB, consisting of three (3) 2GB RDIMMs plus six (6) 8GB RDIMMs
    • 3x 2GB dual-rank PC3-10600 RDIMMs
    • 6x 8GB dual-rank PC3-8500 RDIMMs
CPU1
population order
population order
1
1
Chnl 1
D; 8GB DIMM
D; empty
A; 2GB DIMM
A; empty
4
4
Chnl 2
E; 8GB DIMM
E; empty
B; 2GB DIMM
B; empty
7
7
Chnl 3
F; 8GB DIMM
F; empty
C; 2GB DIMM
C; empty

Standard memory replaced with optional memory (1 CPU model)

RDIMM maximum configuration (1 CPU model)

NOTE: 96GB, consisting of six (6) 16GB quad-rank PC3-8500 RDIMMs
CPU1
population order
population order
1
1
Chnl 1
D; 16GB DIMM
D; empty
A; 16GB DIMM
A; empty
4
4
Chnl 2
E; 16GB DIMM
E; empty
B; 16GB DIMM
B; empty
7
7
Chnl 3
F; 16GB DIMM
F; empty
C; 16GB DIMM
C; empty

UDIMM maximum configuration (1 CPU model)

NOTE: 12GB, consisting of six (6) 2GB dual-rank PC3-10600 UDIMMs
CPU1
population order
population order
1
1
Chnl 1
D; 2GB DIMM
D; empty
A; 2GB DIMM
A; empty
4
4
Chnl 2
E; 2GB DIMM
E; empty
B; 2GB DIMM
B; empty
7
7
Chnl 3
F; 2GB DIMM
F; empty
C; 2GB DIMM
C; empty

Standard memory replaced with optional memory (2 CPU model)

RDIMM maximum configuration (2 CPU model)

NOTE: 192GB, consisting of twelve (12) 16GB quad-rank PC3-8500 RDIMMs
CPU1
population order
population order
1
1
Chnl 1
D; 16GB DIMM
D; 16GB DIMM
A; 16GB DIMM
A; 16GB DIMM
4
4
Chnl 2
E; 16GB DIMM
E; 16GB DIMM
B; 16GB DIMM
B; 16GB DIMM
7
7
Chnl 3
F; 16GB DIMM
F; 16GB DIMM
C; 16GB DIMM
C; 16GB DIMM

UDIMM maximum configuration

NOTE: 48GB, consisting of twelve (12) 4GB dual-rank PC3-10600 UDIMMs
CPU1
population order
population order
1
1
Chnl 1
D; 4GB DIMM
D; 4GB DIMM
A; 4GB DIMM
A; 4GB DIMM
4
4
Chnl 2
E; 4GB DIMM
E; 4GB DIMM
B; 4GB DIMM
B; 4GB DIMM
7
7
Chnl 3
F; 4GB DIMM
F; 4GB DIMM
C; 4GB DIMM
C; 4GB DIMM
NOTE: Capacity references are rounded to the common Gigabyte values.
  • 1GB = 1024MB
  • 2GB = 2048MB
  • 4GB = 4096MB
  • 8GB = 8192MB
  • 16GB = 16384MB

Hp Dl380 G7 Ram Configuration

Legal Disclaimer: Products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may have older product names and model numbers that differ from current models.

Hp Dl380 G7 Memory Slots

Provide feedback

Please rate the information on this page to help us improve our content. Thank you!
  1. Was the information on this page helpful?

Hp Dl360 G7 Driver

Please wait while we process your request.